10. Using the Wi-Fi function
276
Sending images to a smartphone/tablet
1 Select the menu. (P51)
2 Select [Via Network] or [Direct], and connect. (P290)
Preparations
• Install the “Image App” in advance. (P262)
> [Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] >
[Send Images While Recording] or [Send Images Stored in the Camera] >
[Smartphone]
On your smartphone
When connecting with [Via Network]:
1 Turn on the Wi-Fi function.
2 Select the wireless access point you want to connect to, and set.
3 Start “Image App ”. (P262)
When connecting with [WPS Connection]
¢
in [Direct]:
1 Start “Image App ”. (P262)
¢ WPS is a function that allows you to easily set up a connection with a wireless LAN
device and make security-related settings. To check whether your smartphone
supports the function, refer to the operating instructions of the smartphone.
When connecting with [Manual Connection] in [Direct]:
1 Turn on the Wi-Fi function.
2 Select the SSID that matches the one displayed on the screen of this unit.
3 Start “Image App ”. (P262)
MENU
To Next Page
Loading...
