Panasonic Lumix DMC-FZ2000 User Manual

16
2. Getting Started/Basic Operations
Attaching the Lens Hood
In bright sunlight or backlight, the lens hood will minimise lens flare and ghosting.
The lens hood cuts off excess lighting and improves the picture quality.
• Do not hold the lens hood in a way that twists or bends it.
• Check that the camera is turned off.
• Close the flash.
1
Align the mounting mark under
the long side of the lens hood
with the mounting projection on
the edge of the lens.
A Mounting projection (Lens edge)
B Mounting mark (Lens hood)
2
Screw in the lens hood in the
direction of the arrow.
3
Continue to rotate the lens hood
until you hear a “click” even if
you feel some stiffness, and
then align the mark on the
bottom of the camera.
C Rotate until the marks are aligned
• Check that the lens hood is firmly attached and that it does not appear in the picture.




Panasonic Lumix DMC-FZ2000 Specifications

General

Sensor	1-inch High Sensitivity MOS Sensor
Resolution	20.1MP
Aperture	f/2.8-4.5
ISO Range	ISO 125-12800 (expandable to ISO 80-25600)
Image Stabilization	5-Axis Hybrid O.I.S.
Max Shutter Speed	1/4000 sec
Built-in Flash	Yes
External Flash	Yes, via hot shoe
Storage Media	SD/SDHC/SDXC Memory Card
Video Recording	4K UHD at 30p/24p, Full HD at 60p
Viewfinder	2, 360k-dot OLED Live View Finder
Screen	3.0-inch 1, 040k-dot Free-Angle Touch LCD
Connectivity	Wi-Fi, USB 2.0, HDMI
Battery Life	Approx. 350 shots (CIPA)
Weight	966 g with battery and SD card
Dimensions	137.6 x 101.9 x 134.7 mm (5.42 x 4.01 x 5.30 inch)