225
9. Using Menu Functions
[Highlight]
When the Auto Review function is
activated or when playing back, white
saturated areas appear blinking in
black and white.
• If there are any white saturated
areas, we recommend compensating the exposure
towards negative (P103) referring to the histogram (P224)
and then taking the picture again. It may result in a better
quality picture.
• This function is disabled during 4K photo playback,
playback of pictures taken with Post Focus, Multi
Playback, Calendar Playback, or Playback Zoom.
s
[Zebra Pattern]
Indicates parts that may be whited out through
overexposure in a zebra pattern.
s
[ZEBRA1] [ZEBRA2]
Select [SET] to
set the brightness to be processed as a
zebra pattern
.
• You can select a brightness value between [50%] and
[105%]. In [Zebra 2], you can select [OFF]. If you select
[100%] or [105%], only the areas that are already white
saturated are displayed in a zebra pattern. The smaller
the value is, the wider the brightness range to be
processed as a zebra pattern will be.
• If there are any white saturated areas, we recommend
compensating the exposure towards negative (P103)
referring to the histogram (P224) and then taking the
picture.
• Displayed zebra patterns will not be recorded.
• If you assign [Zebra Pattern] to [Fn Button Set] (P55) in
the [Custom] menu, each time you press the function
button to which the setting is assigned, the zebra pattern
toggles as follows:
[Zebra 1]
> [Zebra 2] > [OFF].
When [Zebra 2] is set to [OFF], the setting toggles in the
order of [Zebra 1]
> [OFF], allowing you to switch the
setting quickly.
> [Custom]
MENU
To Next Page
Loading...
Need help?
General
