45
2. Getting Started/Basic Operations
Pressing the cursor button:
Selection of items or setting of values etc., is performed.
Pressing [MENU/SET]:
Confirmation of setting contents, etc., is performed.
• These operating instructions expresses the up, down, left, and
right of the cursor button as 3/4/2/1.
Press [DISP.] to switch the information displayed on the
screen.
• If the information on the screen is not displayed any longer
because no operation was performed for some time, press the
[DISP.] button or touch the screen to display the information
again.
Switching the display method of the viewfinder/monitor
Cursor buttons/[MENU/SET] button
• By assigning [Cursor Button Lock] to a function button, you can disable the cursor buttons and
the [MENU/SET] button. (P55)
[DISP.] button (Switching the displayed information)
In Recording Mode
> [Custom] > [LVF Disp.Style]
> [Custom] > [Monitor Disp. Style]
[ ] (viewfinder style): Scales down images slightly so that you can better review
the composition of the images.
[ ] (monitor style): Scales images to fill the entire screen so that you can see
their details.
MENU
To Next Page
Loading...
