39
2. Getting Started/Basic Operations
The shutter button works in two steps. To take a picture, press it.
Press the shutter button halfway to focus.
A Aperture value
B Shutter speed
C Focus indication
• Aperture value and shutter speed are displayed.
(It will flash in red if the correct exposure is not achieved, except
when set to flash.)
• Once the subject is in focus, the focus indication is displayed.
(When the subject is not in focus, the indication flashes.)
Press the shutter button fully (push it in further),
and take the picture.
∫ About focus range
The focus range is displayed when operating the zoom.
• The focus range is displayed in red when it is not focused after
pressing the shutter button halfway.
D Focus range
The focus range may change gradually depending on the zoom position.
Shutter button (Taking pictures)
• Pictures cannot be taken until focus is achieved when [Focus/Release Priority] (P222)
is set to [FOCUS].
• Even during menu operation or image playback, if you press the shutter button halfway, you
can instantly set the camera ready for recording.
60
602.8
2.8
To Next Page
Loading...
