6. Stabiliser, Zoom and Flash
150
Setting the Flash Functions
Applicable modes:
Select whether to set the flash output automatically or manually.
1 Select the menu. (P51)
2 (When [MANUAL] is selected)
Select the menu.
3 Press 2/1 to select an item and then press [MENU/SET].
• You can set from [1/1] (full brightness) to [1/128] in steps of [1/3].
Changing the firing mode
> [Rec] > [Flash] > [Firing Mode]
[TTL] The camera automatically sets the flash output.
[MANUAL]
Set the luminosity ratio of the flash manually. In [TTL] you can shoot the
photograph you want even when shooting dark scenes that may
otherwise be too brightly lit by the flash.
• When [MANUAL] is set, the luminosity ratio ([1/1], etc.) is displayed on
the flash icon on the screen.
> [Rec] > [Flash] > [Manual Flash Adjust.]
• This item is available only when the built-in flash is used.
To Next Page
Loading...
