298
11. Connecting to other equipment
Watching 4K motion pictures on a TV/ Saving
4K motion pictures on your PC or recorder
∫ Playing Back on a TV Screen
By connecting the camera to a TV that supports motion pictures in
4K and playing back motion pictures recorded with their size set to
[4K] or [C4K] in [Rec Quality], you can enjoy finely-detailed motion
pictures in 4K. Even though the output resolution will be lower, you
can also play them back by connecting the camera to a TV that does not support motion
pictures in 4K.
• To play back motion pictures recorded with [System Frequency] set to [59.94 Hz (NTSC)] and
the recording frame rate set to 24p in [Rec Quality], set [HDMI Mode (Play)] to [AUTO].
For settings other than [AUTO], it cannot output at 24 frames/second.
Connect the camera and a 4K-compatible TV with an HDMI micro cable,
and display the playback screen. (P300)
• When [VIERA Link] is set to [ON] and the camera is connected to a TV supporting VIERA Link,
input of the TV will be switched automatically and playback screen will be displayed. (P302)
• When [System Frequency] is set to a broadcasting system different
from that of your region, images may not be played back correctly.
• When you have motion pictures recorded with [Rec Format] set to
[MP4] and their size set to [4K] in [Rec Quality], you can also play
them back by inserting the card into the SD card slot of a TV that
supports motion pictures in 4K.
• Read the operating instructions for the TV.
Watching motion pictures in 4K
Preparation: If the size is [4K], set [HDMI Mode (Play)] (P233) to [AUTO] or [4K].
If the size is [C4K], set [HDMI Mode (Play)] (P233) to [AUTO] or [C4K].
To Next Page
Loading...
