205
9. Using Menu Functions
Applicable modes:
When Red-Eye Reduction ([ ], [ ]) is selected, Red-Eye Removal is performed
whenever the flash is used. The camera automatically detects red-eye and corrects the
picture.
Settings: [ON]/[OFF]
Applicable modes:
It will select optimal ISO sensitivity with set value as limit depending on the brightness of
the subject.
• It will work when the [Sensitivity] is set to [AUTO] or [ ].
Settings: [200]/[400]/[800]/[1600]/[3200]/[6400]/[12800]/[OFF]
Applicable modes:
You can adjust the ISO sensitivity settings for every 1/3 EV.
Settings: [1/3 EV]/[1 EV]
[Red-Eye Removal]
> [Rec] > [Red-Eye Removal]
• [ ] is displayed on the icon when it is set to [ON].
• Under certain circumstances, red-eye cannot be corrected.
[ISO Limit Set]
> [Rec] > [ISO Limit Set]
Not available in these cases:
• This function is not available in the following cases:
– [Clear Nightscape]/[Cool Night Sky]/[Warm Glowing Nightscape]/[Handheld Night Shot]
(Scene Guide Mode)
– When recording motion pictures
[ISO Increments]
> [Rec] > [ISO Increments]
MENU
MENU
MENU
To Next Page
Loading...
