209
9. Using Menu Functions
∫ Face Settings
You can register information such as names and birthdays for face images of up to 6
people.
1 Press 3
/
4 to select [MEMORY] and then press
[MENU/SET].
2 Press 3/4/2/1 to select the Face Recognition
frame that is not registered, and then press [MENU/
SET].
3 Take the picture adjusting the face with the guide.
• The faces of subjects other than people (pets, etc.) cannot
be registered.
• To display the description of the face registration, press 1
or touch [ ].
Point of recording when registering the face images
• Face front with eyes open and mouth closed, making
sure the outline of the face, the eyes, or the eyebrows
are not covered with hair when registering.
• Make sure there is no extreme shading on the face when
registering.
(Flash will not flash during registration.)
(Good example for registering)
When face is not recognised during recording
• Register the face of same person indoors and outdoors, or with different expressions or
angles. (P210)
• Additionally register at the location of recording.
• When a person who is registered is not recognised, correct by re-registering.
• Face Recognition may not be possible or may not recognise faces correctly even for
registered faces, depending on the facial expression and environment.
KEN
1HZ
To Next Page
Loading...
