9. Using Menu Functions
230
[Travel Date]
(continued)
• You can display the elapsed days and travel destination
during playback or stamp them on recorded pictures in
[Text Stamp] (P249).
• The number of days that have passed since the departure
date can be printed out using the software
“PHOTOfunSTUDIO” (P304).
• The travel date is calculated using the date in the clock
setting and the departure date you set. If you set [World
Time] to the travel destination, the travel date is
calculated using the date in the clock setting and the
travel destination setting.
• The [Travel Date] feature is disabled when recording
[AVCHD] motion pictures.
• [Location] cannot be recorded in the following cases:
– When recording motion pictures
– When recording 4K photos
– When recording with [Post Focus]
s
[Wi-Fi]
[Wi-Fi Function]
P259
[Wi-Fi Setup]
P296
[Beep]
This allows you to set the volume for electronic sound and
the electronic shutter sound.
[Beep Volume]/[Shutter Vol.]/[Shutter Tone]
• [Beep] is not available when [Silent Mode] is set to [ON].
s
[Headphone Volume]
Adjust the volume of the connected headphone set
(commercially available) in 16 steps.
s
[Live View Mode]
Set the frame rate of the recording screen (Live View
screen).
[30fps]:
Reduces the power consumption, extending the operating
time.
[60fps]:
Displays movements smoother.
• The [Live View Mode] setting does not affect recorded
images.
• The viewfinder is fixed to [60fps].
s
> [Setup]
MENU