9. Using Menu Functions
250
Recorded motion picture can be divided in two. It is recommended for when you want to
divide a part you need with a part you do not need.
Dividing a motion picture is permanent. Decide before you divide!
> [Playback] > [Video Divide]
1 Press 2/1 to select the motion picture to divide, and then press [MENU/SET].
[Video Divide]
2 Press 3 at the location to divide.
• You can finely adjust the location for division by pressing
2/1 while the motion picture is paused.
3 Press 4.
• Motion picture may be lost if the card or battery is removed
while processing the dividing.
Not available in these cases:
• Avoid trying to divide motion picture near the very beginning or end of the motion picture.
• Motion pictures with a short recording time
MENU
To Next Page
Loading...
