2. Getting Started/Basic Operations
42
2 Rotate the front/rear dials while the guide is
displayed.
• The settings of the items assigned to the dials will change.
3 Press [MENU/SET] and set.
• You can also complete this step by performing either of the
operations below:
– Press the shutter button halfway
– Press [Fn3]
• Items that are temporarily assigned to the front/rear dials can be used only while the guide
(step
2) or setting screen (step 3) is displayed.
• You can set the items to be assigned temporarily to the front/rear dials in [Dial Operation
Switch Setup] in [Dial Set.] in the [Custom] menu. (P43)
989898
0
ISOISOISOISO
WBWBWBWB
WB
WBWBWBWBWBWBWB
AWB
ISOISOISOISO
To Next Page
Loading...
