95
4. Focus, Brightness (Exposure) and Colour tone Settings
When selecting [ ]/[ ]/[ ]
When selecting [ ]/[ ]/[ ]
Drag your finger over the parts you want to set as AF
areas.
• If you touch one of the selected AF areas, the selection of
the area will be cancelled.
Press 3/4/2/1 to select the AF area, and then press [MENU/SET] to set (repeat).
• The setting is cancelled when [MENU/SET] is pressed again.
• If you press [DISP.], all the selections will be cancelled.
6 Press [Fn5].
∫ Registering the set AF area to [ ], [ ]
or []
1 On the screen in step 3 on P94, press 3.
2 Press 3/4 to select a destination to which the setting will be registered, and
press [MENU/SET].
Button operation
Touch
operation
Description of
operation
3/4/2/1 Touching
Moves the
position
/ Pinching in/out
Changes the size
(3 levels)
[DISP.] [Reset]
Restores the
default setting
Touch operation
Button operation
• Turning off this unit will return the setting adjusted with [ ]/[ ]/[ ] back to the default
setting.
ヤビ
ヤヒ ヤビ ヤピ
To Next Page
Loading...
