125
VQT2S30
Advanced (Recording pictures)
For details on the [SETUP] menu settings, refer to P32.
You can display the local times at the travel destinations and record them on the pictures
you take.
•
Select [CLOCK SET] to set the current date and time in advance. (P30)
Note
•
Return the setting to [HOME] when the vacation is finished by performing steps 1, 2 and 3.
• If [HOME] is already set, change only the travel destination, and use.
• If you cannot find the travel destination in the areas displayed on the screen, set by the time
difference from the home area.
Recording Dates/Times at Overseas Travel Destinations (World Time)
Select [WORLD TIME] from the [SETUP] menu,
and then press 1.
•
When first using the camera after purchasing it, the [PLEASE
SET THE HOME AREA] message appears. Press
[MENU/SET], and set the home area on the screen in step
3
.
Press 4 to select [HOME], and then press
[MENU/SET].
Press 2/1 to select the home area, and then
press [MENU/SET].
A Current time
B Time difference from GMT (Greenwich Mean Time)
• If daylight saving time [ ] is used at the home area,
press 3. Press 3 again to return to the original time.
•
The daylight saving time setting for the home area does not
advance the current time. Advance the clock setting by one hour.
Press 3 to select [DESTINATION] and then
press [MENU/SET] to set.
C Depending on the setting, the time at the travel destination
area or the home area is displayed.
Press
2
/
1
to select the area the travel destination
is in and then press [MENU/SET] to set.
D Current time of the destination area
E Time difference
• If daylight saving time [ ] is used at the travel
destination, press 3. (The time advances by one hour.)
Press 3 again to return to the original time.
Press [MENU/SET] to close the menu.
DMC-G2KPP-VQT2S30_eng.book 125 ページ ２０１０年４月１３日 火曜日 午後９時２０分
To Next Page
Loading...
Need help?
General
