Panasonic Lumix DMC-G2

87
VQT2S30
Advanced (Recording pictures)
∫ Auto White Balance
Depending on the conditions prevailing when pictures are taken, the pictures may take on
a reddish or bluish tinge. Furthermore, when a multiple number of light sources are being
used or there is nothing with a color close to white, Auto White Balance may not function
properly. In a case like this, set the White Balance to a mode other than [AWB].
1 Auto White Balance will work within this range.
2 Blue sky
3 Cloudy sky (Rain)
4 Shade
5 Sunlight
6 White fluorescent light
7 Incandescent light bulb
8 Sunrise and sunset
9 Candlelight
KlKelvin Color Temperature
Note
•
The optimal White Balance will differ depending on the type of halogen lighting being recorded
under so use [AWB], [ ] or [ ].
• The White Balance might not be adjusted for a subject that the flash cannot reach when the
flash is used.
• The White Balance is memorized even if the camera is turned off, but [WHITE BALANCE] for
the Advanced Scene Mode or the Scene Mode is set to [AWB] when the Advanced Scene
Mode or the Scene Mode is changed.
• White Balance is fixed to [AWB] in following conditions.
– In Intelligent Auto Mode
– In [OUTDOOR PORTRAIT] and [INDOOR PORTRAIT] in [PORTRAIT]
– In [SCENERY]
– In [OUTDOOR SPORTS] and [INDOOR SPORTS] in [SPORTS]
– In [FOOD] in [CLOSE-UP]
– In [NIGHT PORTRAIT]
– In [SUNSET] or [PARTY] in Scene Mode
– My Color Mode
• The camera will not be able to operate with 3/4/2/1 if the [DIRECT FOCUS AREA] (P138) is
set to [ON]. Set using the Quick Menu (P33).
Set the White Balance value. Use to match the condition when taking photographs.
Select [ ] or [ ] and then touch
[WHITE SET].
• The White Balance setting screen can also be
displayed by pressing the cursor button toward 3.
Aim the camera at a sheet of white paper etc.
so that the frame in the center is filled by the
white object only and then touch [SET].
Note
•
You may not be able to properly set a White Balance if the subject is too bright or too dark. In
this case, adjust the subject to an appropriate brightness and then reset the White Balance.
Setting the White Balance manually
1)
2)
3)
4)
5)
6)
7)
8)
9)
1
2
1 2
DMC-G2KPP-VQT2S30_eng.book 87 ページ ２０１０年４月１３日 火曜日 午後９時２０分