VQT2S30
136
Advanced (Recording pictures)
Perform these settings if you need to.
Using the [CUSTOM] Menu
• In the Intelligent auto mode, only [GUIDE LINE], [LCD INFO.DISP.] and [REMAINING DISP.]
can be set.
For details on how to select the [CUSTOM] menu settings, refer to P32.
•
Refer to P108 for details.
• When set to [FOCUS AREA SET], it is possible to display the position setting screen of either
AF area or MF assist by pressing 4. Refer to P48, 79 and 83 for details.
• Refer to P126 for details about [REC] Mode menu.
• The camera will not be able to operate with 3/4/2/1 if the [DIRECT FOCUS AREA] (P138) is
set to [ON]. Set using the Quick Menu (P33).
[CUST. SET MEM.]
Up to 3 current camera settings can be registered as custom
settings.
[]
[]
[]
[Fn BUTTON SET]
Assign [REC] Mode menu or [CUSTOM] menu to 4 button. It is
convenient to register functions that are used often.
[FOCUS AREA SET]/[ASPECT RATIO]/[QUALITY]/
[METERING MODE]/[I.RESOLUTION]/[I.EXPOSURE]/
[EX. OPT. ZOOM]/[GUIDE LINE]/[ REC AREA]/
[REMAINING DISP.]
[HISTOGRAM]
This allows you to set either to display or not display the
histogram. (P65)
[OFF]
[ON]: Position of the histogram can be set. Refer to P66 on
how to set.
[GUIDE LINE]
This will set the pattern of guide lines displayed when taking a picture.
(P65)
[OFF]/[ ]/[ ]
[]: Position of the guide line can be set. Refer to P65 for
how to set.
[HIGHLIGHT]
When the Auto Review function is activated or when playing back,
white saturated areas appear blinking in black and white.
[OFF]/[ON]
DMC-G2KPP-VQT2S30_eng.book 136 ページ ２０１０年４月１３日 火曜日 午後９時２０分
To Next Page
Loading...
Need help?
General
