35
VQT2S30
Preparation
Perform these settings if you need to.
About the Setup Menu
[CLOCK SET], [ECONOMY] and [AUTO REVIEW] are important items. Check their
settings before using them.
•
In the Intelligent Auto Mode, only [CLOCK SET], [WORLD TIME], [BEEP], [LCD MODE] and
[LANGUAGE] can be set.
For details on how to select the [SETUP] menu settings, refer to P32.
•
Refer to P30 for details.
• Refer to P125 for details.
• Refer to P123 for details.
• When you connect the camera to a TV, the volume of the TV speakers does not change.
• Adjust the brightness of the screen with 3/4, contrast and saturation
with 2/1 or the rear dial.
• When [DISPLAY] is pressed in screen shown right, it will switch to the
color adjustment screen. Adjust between red and green with 3/4, or
between orange and blue with 2/1 or the rear dial.
Press [MENU/SET] to return to the LCD adjustment screen.
• It will adjust the LCD monitor when the LCD monitor is in use, and the
viewfinder when the viewfinder is in use.
U [CLOCK SET] Setting Date/Time.
[WORLD TIME]
Set the time in your home area and travel destination.
“ [DESTINATION]:
Travel destination area
– [HOME]:
Your home area
— [TRAVEL DATE]
Set the departure date and the return date of the vacation.
[TRAVEL SETUP]
[OFF]/[SET]
[LOCATION]
[OFF]/[SET]
[BEEP]
Set the volume of the focus confirmation beep, the self-timer beep
and the alarm beep.
[s] (Muted)
[t] (Low)
[u] (High)
u [VOLUME]
Adjust the volume of the speaker to any of 7 levels.
[MONITOR]/
[VIEWFINDER]
Brightness, color, or red or blue tint of the LCD monitor/viewfinder
is adjusted.
DMC-G2KPP-VQT2S30_eng.book 35 ページ ２０１０年４月１３日 火曜日 午後９時２０分
To Next Page
Loading...
