VQT2S30
34
Preparation
Touch the menu item and the setup.
A Item
B Settings
Touch [ ] to close the Quick Menu.
∫ When operating buttons
The Quick Menu can be set by pressing the [Q.MENU] button.
To close the Quick Menu, press the [Q.MENU] button again.
•
Setup method is different depending on the displayed screen during recording.
Refer to P63 about the displayed screen.
[ ] (LCD monitor style)
After selecting the items with 2/1, you can select the
setting contents with 3/4. Set by pressing [MENU/SET].
•
You can also use the rear dial to set.
LCD recording information display in [ ]
(LCD monitor style)
Select the item with 3/4/2/1, press [MENU/SET], and
then select the setting contents with 3/4/2/1. Set by
pressing [MENU/SET].
•
You can also use the rear dial to set.
• You can change the settings by directly touching the items,
without displaying the Quick Menu.
[ ] (Finder style)
Select the item by rotating the rear dial, and then press
the rear dial. Select the setting contents by rotating the
rear dial, and then press the rear dial to set.
•
You can also press 3/4/2/1 and [MENU/SET] to set.
DMC-G2KPP-VQT2S30_eng.book 34 ページ ２０１０年４月１３日 火曜日 午後９時２０分
To Next Page
Loading...
Need help?
General
