VQT2S30
148
Advanced (Playback)
∫ Changing the slide show settings
You can change the settings for slide show playback by selecting
[EFFECT] or [SETUP] on the slide show menu screen.
[EFFECT]
This allows you to select the screen effects when switching from
one picture to the next.
[NATURAL], [SLOW], [SWING], [URBAN], [OFF], [AUTO]
•
When [URBAN] has been selected, the picture may appear in black and white as a screen
effect.
• [AUTO] can be used only when [CATEGORY SELECTION] has been selected. The pictures
are played back with the recommended effects in each category.
• [EFFECT] is set to [OFF] when playing a slide show with motion pictures only.
• Some [EFFECT] will not operate when playing back pictures displayed vertically.
[SETUP]
[DURATION] or [REPEAT] can be set.
•
[DURATION] can be set only when [OFF] has been selected as the [EFFECT] setting.
Note
•
It is not possible to add new music.
Playback in [NORMAL PLAY], [PICTURE PLAY], [AVCHD Lite PLAY],
[MOTION JPEG PLAY], [CATEGORY PLAY] or [FAVORITE PLAY] can be selected.
Select [PLAYBACK MODE] on the [PLAYBACK] Mode menu. (P32)
Press 3/4 to select the item and then press
[MENU/SET].
• [FAVORITE PLAY] can be selected only when [FAVORITE] on
the [PLAYBACK] menu (P158) is at [ON] and there are pictures
already set as favorites.
• Refer to P57 for information about how to play back pictures in
[NORMAL PLAY], [PICTURE PLAY], [AVCHD Lite PLAY], [MOTION JPEG PLAY] or
[FAVORITE PLAY] can be selected.
Item Settings
[DURATION] 1SEC./2SEC./3SEC./5SEC.
[REPEAT] OFF/ON
[SOUND]
[OFF]: There will be no sound.
[AUTO]:
Music is played when the still pictures are played
back, and audio is played when the motion pictures
or still pictures with audio are played back.
[MUSIC]: Music is played back.
[AUDIO]:
Audio (only for motion pictures and still pictures with
audio) is played back.
[PLAYBACK MODE]
DMC-G2KPP-VQT2S30_eng.book 148 ページ ２０１０年４月１３日 火曜日 午後９時２０分
To Next Page
Loading...
