59
VQT2S30
Basic
You can display pictures by recording date.
Note
•
The recording date of the picture selected in the playback screen becomes the date selected
when the calendar screen is first displayed.
• If there are multiple pictures with the same recording date, the first picture recorded on that day
is displayed.
• You can display the calendar between January 2000 and December 2099.
• If the date is not set in the camera, the recording date is set as January 1st, 2010.
• If you take pictures after setting the travel destination in [WORLD TIME], the pictures are
displayed by the dates at the travel destination in Calendar Playback.
Displaying Pictures by Recording Date (Calendar Playback)
Rotate the rear dial left to display the
calendar screen.
Press 3/4/2/1 to select the date to be played back.
• If there were no pictures recorded during a month, the month is not displayed.
Press [MENU/SET] or the rear dial to
display the pictures that were recorded on
the selected date.
• Rotate the rear dial left to return to the calendar
screen display.
Press 3/4/2/1 to select a picture and then press [MENU/SET] or
the rear dial.
• The picture that was selected will appear.
DMC-G2KPP-VQT2S30_eng.book 59 ページ ２０１０年４月１３日 火曜日 午後９時２０分
To Next Page
Loading...
Need help?
General
