VQT2S30
42
Preparation
∫ About the eye sensor automatic switching
Eye sensor is active when the [LVF/LCD AUTO] (P141) in the [CUSTOM] menu is set to
[ON], switching automatically to viewfinder display when an eye or object is moved closer
to the viewfinder, and to LCD monitor display when it is moved away.
•
When the LCD monitor turns on, the
viewfinder turns off (and vice versa).
• Eye sensor might not work properly depending
on the shape of your eyeglasses, the way you
hold the camera, or bright light shining around
the eyepiece. Switch manually in that case.
• The eye sensor automatic switching works
when the sensor recognizes things that come
closer to it, therefore it is recommended that
[LVF/LCD AUTO] be set to [OFF] in
[ECONOMY] (P36).
• The eye sensor is disabled during motion picture playback, slide show, and output to TV.
Press [LVF/LCD] to switch the
monitor screen.
A Viewfinder
B Eye sensor
C LCD monitor
D [LVF/LCD] button
E Eye cup
• It is possible to switch between the LCD (LCD
monitor) and LVF (viewfinder) display
manually.
∫ Diopter adjustment
Adjust the diopter to suit your vision so that
you can see the viewfinder clearly.
Look at the display on the viewfinder and
rotate the diopter adjustment dial to
where the screen is clearest.
Note
•
The eye cup cannot be removed. Please read
P186 for the cleaning and care.
Switching the LCD monitor/Viewfinder
DMC-G2KPP-VQT2S30_eng.book 42 ページ ２０１０年４月１３日 火曜日 午後９時２０分
To Next Page
Loading...
Need help?
General
