VQT2S30
164
Connecting to other equipment
Note
•
Depending on the [ASPECT RATIO], bands may be displayed on the top and bottom or the left
and right of the pictures.
• Do not use any other cables except a genuine Panasonic HDMI mini cable (RP-CDHM15,
RP-CDHM30; optional).
Part numbers: RP-CDHM15 (1.5 m) (5 feet), RP-CDHM30 (3.0 m) (10 feet)
• Output from the HDMI mini cable has priority when both AV cable and HDMI mini cable are
connected.
• HDMI output is not possible even if you connect the HDMI mini cable while the unit is
connected to the PC or the printer.
• HDMI connection is disabled and the connection with the USB connection cable will take
priority when you connect the USB connection cable while it is outputting via the HDMI mini
cable.
• During HDMI output, no picture is displayed on the LCD monitor or viewfinder.
• When pictures are displayed, they may not be displayed properly depending on the type of TV.
• Read the operating instructions for the TV.
• Audio will be played back in monaural.
• Audio recorded with the stereo microphone (DMW-MS1; optional) in [STEREO] will be played
back as stereo. Refer to P180 for the stereo microphone.
Connect the HDMI mini cable to the [HDMI] socket on the camera.
Turn the TV on and switch to HDMI input.
Turn the camera on and then press [(].
• When [VIERA Link] (P38) is set to [ON] and the camera is connected to a TV supporting
VIERA Link, input of the TV will be switched automatically and playback screen will be
displayed (P165).
DMC-G2KPP-VQT2S30_eng.book 164 ページ ２０１０年４月１３日 火曜日 午後９時２０分
To Next Page
Loading...
