EasyManuals Logo

Panasonic Lumix DMC-G2 User Manual

Panasonic Lumix DMC-G2
220 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #84 background imageLoading...
Page #84 background image
VQT2S30
84
Advanced (Recording pictures)
3 Press [MENU/SET] and enlarge the MF Assist position setting screen.
MF Assist is enlarged from 5 times to 10 times when the rear dial is rotated right. It will
return to 5 times by rotating the rear dial left.
For the operations while displaying the MF Assist, refer to step 2 of the Taking Pictures
with Manual Focus
procedure.
4 Press [MENU/SET] to close MF Assist.
The screen returns to the previous screen.
Move the MF Assist easily with button operations
When the [DIRECT FOCUS AREA] (P138) in the [CUSTOM] menu is set to [ON], it is
possible to move the MF Assist directly with 3/4/2/1.
[SENSITIVITY] (P89), [Fn BUTTON SET] (P136), [FILM MODE] (P91), or [WHITE BALANCE]
(P86) cannot be set with 3/4/2/1. Make the setting with the Quick Menu (P33).
Technique for Manual Focus
1 Rotate the focus ring to focus on the
subject.
2 Rotate it a little more.
3 Finely focus on the subject by rotating the
focus ring slowly in reverse.
About the focus distance reference mark
The focus distance reference mark is a mark
used to measure the focus distance.
Use this when taking pictures with Manual
Focus or taking close-up pictures.
A Focus distance reference mark
B Focus distance reference line
C 0.3 m (0.99 feet) (When the
1442 mm/
F3.5–5.6
lens included in DMC-G2K is used)
If you are taking close-up pictures
We recommend using a tripod and the self-timer (P77).
The effective focus range (depth of field) is significantly narrowed. Therefore, if the distance
between the camera and the subject is changed after focusing on the subject, it may become
difficult to focus on it again.
The resolution of the periphery of the picture may decrease slightly. This is not a malfunction.
Note
When the MF Assist is started by the touch panel operation or button operation, MF Assist will
continue to display even after about 10 seconds have passed without operating the focus ring,
touch panel, or 3/4/2/1.
If you use the zoom function after focusing on the subject, focus on the subject again.
The MF Assist does not appear when using the Digital Zoom or recording motion pictures.
After canceling Sleep Mode, focus on the subject again.
MF Assist or MF guide may not display depending on the lens used.
DMC-G2KPP-VQT2S30_eng.book 84 ージ 2010年4月13日 火曜日 午後9時20

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic Lumix DMC-G2 and is the answer not in the manual?

Panasonic Lumix DMC-G2 Specifications

General IconGeneral
BrandPanasonic
ModelLumix DMC-G2
CategoryDigital Camera
LanguageEnglish

Related product manuals