105
4. Focus and Shutter (Drive Mode) Settings
By setting [Touch AF] (P314) in [Touch Settings] of the [Custom] menu to [AF+AE], you
can optimize the focus and brightness for the position you have touched.
1 Select the menu. (P54)
2 Select [Touch AF] and then touch [AF+AE].
3 Touch the subject you want to optimize the
brightness for.
•
AF area setting screen is displayed. (P101)
• The brightness optimization position is displayed on the
center of the AF area. The position follows the movement
of the AF area.
• [Metering Mode] is set to [ ], which is used exclusively
for the Touch AE.
• Touching [Reset] returns the brightness optimization position and the AF area to the
center.
4 Touch [Set].
•
The AF area with the same function as [Ø] is displayed on the touched position.
• Touching [ ] returns [Metering Mode] to the original setting and cancels the
brightness optimization position. The AF area setting is also canceled.
• Touching [ ] returns [Metering Mode] to the original setting and cancels the
brightness optimization position.
Optimizing the focus and brightness for a touched position
Applicable modes:
> [Custom] > [Touch Settings]
When the background has become too bright, etc., the
brightness contrast with the background can be
adjusted by compensating the exposure.
MENU
ュリヴヱハ
6HW5HVHW
To Next Page
Loading...
Need help?
General
