8. Recording Motion Pictures
208
You can record motion pictures while hearing the sounds that are being recorded by
connecting a commercially available headphones to this unit.
A Commercially available headphone
• Do not use the headphone cables with the length of 3 m (9.8 feet) or more.
• When headphones are connected, electronic sounds and electronic shutter sounds are muted.
∫ Switch the sound output method
•
The sound level you set in [Mic Level Adj.] is displayed as a mic level.
• If you use the HDMI output during recording, the setting is fixed to [REC SOUND].
You can change the screen and display settings so that it will be convenient for you to
handle motion pictures with the camera.
Set whether or not the mic levels are displayed on the recording screen.
Settings: [ON]/[OFF]
•
When [Mic Level Limiter] is set to [OFF], [Mic Level Disp.] is fixed to [ON].
Checking the sound while recording motion pictures
Applicable modes:
> [Motion Picture] > [Sound Output]
[REAL TIME]
Actual sound without time lag.
It may be different to the audio recorded in the motion picture.
[REC SOUND]
Sound that is being recorded in motion pictures.
The audio may be output slower than the actual audio.
Using screens and displays suitable for motion picture recording
[Mic Level Disp.]
Applicable modes:
> [Motion Picture] > [Mic Level Disp.]
To Next Page
Loading...
Need help?
General
