239
9. Playing Back and Editing Images
You can stamp the recording date/time, name, location or travel date onto the recorded
pictures.
1 Select the menu. (P54)
3 Press 3/4 to select [Set], and then press [MENU/SET].
[Text Stamp]
> [Playback] > [Text Stamp] > [Single]/[Multi]
2 Select the picture.
•
[‘] appears on screen if the picture is stamped with text.
[Single] setting
1 Press 2/1 to select the picture.
2 Press [MENU/SET].
[Multi] setting
1 Press 3/4/2/1 to select the picture and then press
[MENU/SET] (repeat).
•
The setting is canceled when [MENU/SET] is pressed
again.
2 Press 2 to select [OK], and then press [MENU/SET]
to execute.
LISA
LISA
To Next Page
Loading...
Need help?
General
