5. Picture Quality and Color Tone Settings
144
Using Image Correction Functions
Contrast and exposure are compensated when the brightness difference between the
background and subject is great, etc.
Settings: [AUTO]/[HIGH]/[STANDARD]/[LOW]/[OFF]
•
[AUTO] automatically sets the intensity of the effect according to the recording conditions.
• Those menu items are shared by the [Rec] menu and the [Motion Picture] menu. When the
setting for either of the two is changed, the setting for the other is also changed.
Not available in these cases:
•
This feature may be automatically disabled, depending on the lighting conditions.
• In the following cases, [i.Dynamic] does not work:
– When [HDR] is set to [ON]
Pictures with sharp profile and resolution can be taken by using the Intelligent Resolution
Technology.
Settings: [HIGH]/[STANDARD]/[LOW]/[EXTENDED]/[OFF]
•
[EXTENDED] allows you to take natural pictures with a higher resolution.
• When recording a motion picture, [EXTENDED] changes to [LOW].
• Those menu items are shared by the [Rec] menu and the [Motion Picture] menu. When the
setting for either of the two is changed, the setting for the other is also changed.
Compensating the contrast and exposure ([i.Dynamic])
Applicable modes:
> [Rec] > [i.Dynamic]
Raising the resolution ([i.Resolution])
Applicable modes:
> [Rec] > [i.Resolution]
To Next Page
Loading...
Need help?
General
