11. Customizing the Camera’s Settings
308
For details on how to select the [Custom] menu settings, refer to P54.
Adjusting/not adjusting the focus manually after achieving Auto Focus
[AF+MF] > [ON]/[OFF]
When AF Lock is ON (press the shutter button halfway with the focus mode set to [AFS]
or set AF Lock using [AF/AE LOCK]), you can make fine adjustments to the focus
manually.
Manual Focus
Setting the operations for displaying the MF Assist
[MF Assist]
•
Available settings vary depending on the lens used.
When an interchangeable lens having a focus ring (H-HS12035/H-FS14140) is used
[]Enlarge by operating the lens’s focus ring or focus lever or pressing [ ]
¢
.
[]Enlarge by operating the lens’s focus ring or focus lever.
[] Enlarge by pressing [ ]
¢
.
[OFF]
The MF Assist cannot be enlarged even if you operate the lens’s focus ring or
focus lever or press [ ]
¢
.
• If you press [ ]
¢
when this item is set to [ ] or [OFF], the screen that lets you set the
area to be enlarged will be displayed.
When an interchangeable lens with no focus ring is used
[ON]
You can adjust the focus when the screen that lets you set the area to be enlarged is
displayed after pressing [ ]
¢
.
[OFF]
You can adjust the focus after pressing [ ]
¢
without displaying the screen that lets
you set the area to be enlarged.
¢ Press the function button to which [AF Mode/MF] in [Fn Button Set] (P317) has been
assigned. (assigned to [ ]/[Fn3] at the time of purchase)
Displaying/not displaying the MF Guide
[MF Guide] > [ON]/[OFF]
A Indicator for ¶ (infinity)
When [MF Guide] on the [Custom] menu is set to [ON] and
you focus manually, the MF guide is displayed on the
screen. You can check whether the point of focus is to the
near side or the far side.
To Next Page
Loading...
Need help?
General
