4. Focus and Shutter (Drive Mode) Settings
116
Taking Pictures using Auto Bracket
Maximum of 7 pictures will be recorded with different exposure settings following the
Exposure Compensation range every time the shutter button is pressed.
With Auto Bracket
[Step]: [3•1/3], [Sequence]: [0/s/r]
1
Set the drive mode dial to [ ].
2
Focus on the subject and take a picture.
• If you press and hold the shutter button, the number of
pictures that you set is taken.
• The Auto Bracket indication blinks until the number of
pictures that you set is taken.
• The picture count is reset to [0] if you change the Auto Bracket setting or turn the
camera off before all the pictures that you set are taken.
Applicable modes:
1st picture 2nd picture 3rd picture
d0EV j1/3 EV i1/3 EV
AFS
FHD
MOV
24
p
L
4:3
To Next Page
Loading...
Need help?
General
