291
10. Using the Wi-Fi/NFC Function
Images can be sent to the AV device of relatives and acquaintances via “LUMIX CLUB”.
1 Select the menu. (P54)
2 Select [Add new device].
3 Enter the address number.
4 Enter the access code.
5 Enter any name.
•
A maximum of 28 characters can be entered. A two-byte character is treated as two
characters.
• Exit the menu after it is set.
• Refer to “Entering Text” (P57) for information on how to enter text.
Information on AV device that has already been saved can be changed or deleted.
1 Select the menu. (P54)
2 Select the AV device you want to change or delete.
3 Select [Edit] or [Delete].
•
Exit the menu after it is set.
Configuring the external AV device settings
Preparations:
Check the address number (16-digit number) and access number (4-digit number) of the
destination AV device issued by “LUMIX CLUB”.
(Refer to the AV device instruction manual for details)
> [Setup] > [Wi-Fi] > [Wi-Fi Setup] > [External AV device]
Change or delete information on registered AV device
> [Setup] > [Wi-Fi] > [Wi-Fi Setup] > [External AV device]
[Edit]
Change information on AV device that has already been
registered.
Perform steps
3 through 5 of “Configuring the external AV
device settings
”.
[Delete]
Delete information on AV device that has already been registered.
• Confirmation screen is displayed. It is executed when [Yes] is
selected.
To Next Page
Loading...
Need help?
General
