247
9. Playing Back and Editing Images
This mode allows you to automatically display pictures vertically if they were recorded
holding the camera vertically or rotate pictures manually in 90o steps.
•
The [Rotate] function is disabled when [Rotate Disp.] is set to [OFF].
1 Select the menu. (P54)
2 Press 2/1 to select the picture and then press [MENU/SET].
•
The [Rotate] function is disabled for Group Pictures.
3 Press 3/4 to select the direction to rotate the
picture and then press [MENU/SET].
:
The picture rotates clockwise in steps of 90o.
:
The picture rotates counter-clockwise in steps of 90o.
•
Exit the menu after it is set.
Select the menu. (P54)
•
The pictures are displayed without being rotated when you select [OFF].
• Exit the menu after it is set.
Not available in these cases:
•
When you play back pictures on a PC, they cannot be displayed in the rotated direction unless
the OS or software is compatible with Exif.
Exif is a file format for still pictures which allows recording information etc. to be added. It was
established by “JEITA (Japan Electronics and Information Technology Industries Association)”.
• [Rotate Disp.] may not work on a screen that plays back multiple pictures, such as the one
displayed after [Delete Multi] is selected.
[Rotate]/[Rotate Disp.]
[Rotate] (The picture is rotated manually)
> [Playback] > [Rotate]
[Rotate Disp.] (The picture is automatically rotated and displayed)
> [Playback] > [Rotate Disp.] > [ON]
MENU
To Next Page
Loading...
Need help?
General
