6. Recording Suited for the Subject and Scene
156
• It is possible to record while in Preview Mode.
• Range for shutter speed effect check is 8 seconds to 1/8000th of a second.
When the exposure setting is too bright or too dark, you can use one push AE to achieve a
suitable exposure setting.
•
The exposure meter is displayed, and the aperture and shutter speed are changed to give
a suitable exposure.
• In the following cases, suitable exposure cannot be set.
– When the subject is extremely dark and it is not possible to achieve adequate exposure
by changing the aperture value or shutter speed
– When recording using the flash
– In Preview Mode (P155)
– When using a lens that includes an aperture ring
• In Program AE Mode, Program Shift can be canceled by pressing the function button to which
[One Push AE] has been set.
Easily set aperture/shutter speed for suitable exposure (One Push AE)
Applicable modes:
How to tell if the exposure is not adequate
•
If the aperture values and shutter speed blink red A when
the shutter button is pressed halfway.
• If the Manual Exposure Assistance is anything other than
when in Manual Exposure mode.
For more details on Manual Exposure Assistance, refer to
P153.
1 Set a function button to [One Push AE]. (P317)
•
The following step is an example in which [One Push AE] is assigned to [Fn8].
2 Touch [ ].
3 (When exposure is not adequate)
Touch [Fn8].
00
-
3
-
3
2
00
8000800080003.53.53.5
9898r98
00
-
3
-
3
2
00
8000
80003.5
3.5
98
r98
2
00
SSSSSS
F
15 250
2.8 4.0 5.6
1256030
6060602.8
0
AE
Fn9
Fn10