89
3. Easy Recording
Taking Pictures Using the Touch Function
Just by touching the subject you want as your point of focus, the camera will focus on the
subject and take the picture automatically.
∫ To cancel the Touch Shutter function
Touch [ ].
•
If shooting with the touch shutter fails, the AF area turns red and disappears. In that case, try
again.
• Measurement of brightness is performed on the spot touched when the [Metering Mode] (P161)
is set to [ ].
At the edge of the screen, the metering may be affected by the brightness around the touched
location.
Taking pictures using the Touch Shutter function
Applicable modes:
1
Touch [ ].
2
Touch [ ].
• Icon will change to [ ], and taking a picture with the
Touch Shutter function becomes possible.
3
Touch the subject you wish to focus on, and
then take a picture.
• The picture is taken when the focus is achieved.
×
AE
To Next Page
Loading...
Need help?
General
