3. Easy Recording
88
∫ Setting the light source
You can change the position and size of the light source.
1 Press 3 to display the setting screen.
•
Setting screen can also be displayed by touching in order of [ ] then [ ].
2 Press 3
/
4
/
2
/
1 to move the center position of the light source.
• The position of the light source can also be moved by touching the screen.
• The center of the light source can be moved to the edge of the screen.
3 Adjust the size of the light source by rotating the rear
dial.
•
It can be changed to 4 different sizes.
• The display can also be enlarged/reduced by pinching out/pinching in.
• Pressing [DISP.] will return the light source setting back to the default setting.
4 Press [MENU/SET] to set.
• Display of the recording screen will be delayed more than usual and the screen will look as if
frames are dropping.
Point for when placing the center of the light
source
A more natural appearance can be created by placing
the center of the light source outside the image.
To Next Page
Loading...
Need help?
General
