10. Using the Wi-Fi/NFC Function
302
[Wi-Fi Setup] Menu
Configure the settings required for the Wi-Fi function.
The settings cannot be changed when connected to Wi-Fi.
Select the menu. (P54)
•
Refer to P286 for details.
• For details on how to enter characters, refer to “Entering Text” section on P57.
• If you are using the PC with standard settings, you do not need to change the workgroup.
• Refer to P291 for details.
> [Setup] > [Wi-Fi] > [Wi-Fi Setup] > Desired item to be set
[LUMIX CLUB] Acquires or changes the “LUMIX CLUB” login ID.
[PC Connection]
You can set the workgroup.
To send images to a PC, a connection to the same workgroup as
the destination PC is required.
(The default setting is “WORKGROUP”.)
[Change Workgroup Name]:
Enter the workgroup of the connecting PC.
[Restore to Default]:
Restores the default state.
[Device Name]
You can change the name of this unit.
1 Press [DISP.].
2 Enter the desired device name.
•
For details on how to enter characters, refer to “Entering Text”
section on P57.
• A maximum of 32 characters can be entered.
[External AV device]
Images can be sent to the AV device of relatives and
acquaintances via “LUMIX CLUB”.
[NFC Operation]
Configures the settings for the NFC function.
[ON]:
NFC function is worked.
[OFF]
To Next Page
Loading...
Need help?
General
