5. Picture Quality and Color Tone Settings
132
Setting the Light Sensitivity
This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure
enables pictures to be taken even in dark places without the resulting pictures coming out
dark.
1
Press [ ].
2
Select the ISO sensitivity by rotating the rear
dial or the front dial.
3
Press [ ] to set.
• You can also press the shutter button halfway to set.
¢1 When the [ISO Limit Set] (P133) of [Rec] menu is set to anything except [OFF], it is set
automatically within the value set in [ISO Limit Set].
¢2 Only available when [Extended ISO] is set.
Applicable modes:
AUTO
The ISO sensitivity is automatically adjusted according to the
brightness.
• Maximum [ISO3200] (With the flash on [ISO1600])
¢1
(Intelligent)
The camera detects movement of the subject and then
automatically sets the optimum ISO sensitivity and shutter
speed to suit the movement of the subject and brightness of
the scene to minimize the jitter of the subject.
• Maximum [ISO3200] (With the flash on [ISO1600])
¢1
• The shutter speed is not fixed when the shutter button is
pressed halfway. It is continuously changing to match the
movement of the subject until the shutter button is pressed
fully.
100
¢2
/200/400/800/1600/
3200/6400/12800/25600
The ISO sensitivity is fixed to various settings.
• When the [ISO Increments] in [Rec] menu (P134) is set to
[1/3 EV], items of ISO sensitivity that can be set will
increase.
AUTOAUTO
2
00
2
00
4040
ISO
ISOISOISOISOISOISOISOISOISOISOISO
AUTOAUTO
To Next Page
Loading...
Need help?
General
