119
4. Focus and Shutter (Drive Mode) Settings
∫ Changing the time setting for the self-timer
1 Select the menu. (P54)
2 Press 3/4 to select the mode and then press [MENU/SET].
•
Exit the menu after it is set.
• The flash output may vary slightly when the [ ] is selected.
Not available in these cases:
•
It cannot be set to [ ] in the following cases.
– When White Balance Bracket is set
– [Multi Exp.]
> [Rec] > [Self Timer]
Picture is taken 10 seconds after shutter is pressed.
After 10 seconds the camera takes 3 pictures at about 2 seconds intervals.
Picture is taken 2 seconds after shutter is pressed.
• When using a tripod, etc., this setting is a convenient way to avoid the jitter
caused by pressing the shutter button.
We recommend using a tripod when recording with the self-timer.
To Next Page
Loading...
Need help?
General
