6. Recording Suited for the Subject and Scene
164
• When the Extended Tele Conversion is used, angle of view for still pictures will be different from
the angle of view for motion pictures because the zoom factor is different between them.
Angle of view for recording can be checked beforehand by matching the [Rec Area] (P311)
setting to the mode you wish to record in.
Not available in these cases:
•
This function is not available in the following cases:
– When the motion picture size is set to [4K] or [C4K] in [Rec Quality]
– When a frame rate with a number of frames greater than 60fps is set in [Variable Frame Rate]
– When [Quality] is set to [ ], [ ] or [ ]
– When [Burst Rate] is set to [SH]
– When [HDR] is set to [ON]
– [Multi Exp.]
– When the image of the camera is output through the HDMI connection (except for Creative
Video Mode)
Simply zooming in with the Extended Tele Conversion
>
>
[Rec] > [Ex. Tele Conv.] > [TELE CONV.]
[Motion Picture] > [Ex. Tele Conv.] > [ON]
A [OFF]
To Next Page
Loading...
Need help?
General
