45
2. Getting Started/Basic Operations
([ ] viewfinder style)
•
Screen will switch as follows:
(Example of display on viewfinder)
¢ Histograms are displayed when the [Histogram] of the [Custom] menu is set to [ON]. (P309)
It is also possible to display the Exposure meter by setting the [Expo.Meter] of the [Custom]
menu to [ON]. (P310)
• If you set [Guide Line] in the [Custom] menu, the guide lines are displayed. (P309)
• If no operation is performed, part of the information on the screen will gradually become darker
after approximately 10 seconds has passed, and will no longer be displayed after
approximately 1 minute has passed. Pressing the [DISP.] button or touching the monitor will
make the display reappear. This operation is to prevent screen burn-in and is not a malfunction.
With information
(detailed
information)
¢
With information
With information
(detailed
information
, tilt
sensor display)
¢
With information
(tilt sensor
display)
To Next Page
Loading...
Need help?
General
