16. Wi-Fi/Bluetooth
DVQX1961 (ENG)
172
End Bluetooth Connection
¨ [ ] ¨ [ ] ¨ [Bluetooth] ¨ [Bluetooth] ¨ Select [OFF]
Connecting to a Paired Smartphone
Connect paired smartphones using the following procedure.
1
Enable the Bluetooth function of the camera.
0
¨ [ ] ¨ [ ] ¨ [Bluetooth] ¨ [Bluetooth] ¨ [ON]
2
On the smartphone, start up “LUMIX
Sync ”.
0
If a message is displayed indicating that the
smartphone is searching for cameras,
close the message.
3
Select [ ].
4
Select [Bluetooth Setup].
5
Turn Bluetooth ON.
6
From [Camera registered] items, select
the camera’s device name.
Terminating the Wi-Fi Connection
1
Press the shutter button halfway to set the camera to recording mode.
2
Terminate the Wi-Fi connection.
0
¨ [ ] ¨ [ ] ¨ [Wi-Fi] ¨ [Wi-Fi Function] ¨ [Yes]
3
On the smartphone, close the “LUMIX Sync”.
0 Even if you terminate the connection, the pairing information for it will not be
deleted.
0 Even if you set up pairing with more than one smartphone, you can only
connect to one smartphone at a time.
0 When pairing takes some time, cancelling the pairing settings on both the
smartphone and camera and re-establishing the connection may result in the
camera being detected correctly.
LUMIX Sync
Bluetooth
XXXXXXXX
DC-S1HGN-DVQX1961_eng.book 172 ページ ２０１９年８月８日 木曜日 午後５時５５分
To Next Page
Loading...
