DVQX1961 (ENG)
77
7. Metering/Exposure/ISO
Sensitivity
Type of optical measurement to measure brightness can be changed.
¨ [ ] ¨ [ ] ¨ Select [Metering Mode]
You can compensate the exposure when the correct exposure determined
by the camera is too bright or too dark.
You can adjust the exposure in 1/3 EV steps in a range of n5EV.
When recording videos or recording with 6K/4K photo or Post-Focus, the
range changes to n3EV.
[Metering Mode]
[](Multi-metering)
Method in which the most suitable exposure is
measured by judging the allocation of brightness on
the whole screen.
[]
(Centre-
weighted)
Method used to perform measuring which focuses on
the centre of the screen.
[](Spot)
Method used to measure the extremely small part
around the spot-metering target.
[]
(Highlight-
weighted)
Method used to perform measuring which focuses on
the highlighted parts of the screen to prevent
overexposure.
This is suitable for theatre photography, etc.
Exposure Compensation
DC-S1HGN-DVQX1961_eng.book 77 ページ ２０１９年８月８日 木曜日 午後５時５５分
To Next Page
Loading...
