2. Getting Started
DVQX1961 (ENG)
38
The monitor on this camera has angling and tilting that you can adjust in
combinations to freely change the orientation and angle.
At the time of purchase, the monitor is stowed in the camera body. Turn the
monitor surface out before use.
1
Open the monitor.
2
Rotate the monitor.
0 You can rotate 180° towards the lens and
90° down.
3
Return the monitor to the
original position.
0 When you have attached a lens that does not have a communication function
with this camera, after turning on the camera, a message asking for
confirmation of the lens information is displayed. You can register items such
as the image circle and focal length for the lens when you select [Yes]. (l 75)
0 You can change the settings so that the confirmation message is not
displayed:
[] ¨ [ ] ¨ [Lens Info. Confirmation]
Adjusting the Monitor Direction and
Angle
DC-S1HGN-DVQX1961_eng.book 38 ページ ２０１９年８月８日 木曜日 午後５時５５分
To Next Page
Loading...
