DVQX1961 (ENG)
87
9. Flash
This document gives an overview of recording with a flash. Refer to the
“Operating Instructions” (PDF format) for details about recording using a
flash and recording with a wireless flash.
Removing the Hot Shoe Cover
Before attaching the Flash (optional), remove the hot shoe cover.
Refer to the operating instructions for the Flash for details about how to
attach it.
Remove the hot shoe cover by
pulling it in the direction indicated
by arrow 2 while pressing it in the
direction indicated by arrow 1.
Flash Synchro Socket
You can use a commercially available external flash by connecting a
synchro cable to the flash synchro socket.
Using an External Flash (Optional)
0 Flash recording is not possible when the following functions are being used:
– [6K/4K PHOTO]/[Post-Focus]
– [ELEC.]/[Silent Mode]/[High Resolution Mode]
– [Filter Settings]
0 Use an external flash with a synchronisation voltage of 250 V or less.
0 In the [ ] mode, the flash synchro socket is used to synchronise time
codes with an external device. (l 108) Do not connect an external flash to the
flash synchro socket when set to the [ ] mode. Doing so may cause a
malfunction in the camera.
DC-S1HGN-DVQX1961_eng.book 87 ページ ２０１９年８月８日 木曜日 午後５時５５分
To Next Page
Loading...
