11. Special Video Recording
DVQX1961 (ENG)
129
Setting [Photo Style] to [V-Log] enables Log recording.
Images finished with rich gradation can be created through post production
processing.
¨ [ ] ¨ [ ] ¨ [Photo Style] ¨ Select [V-Log]
Exposure When [V-Log] Is Set
The [V-Log] curve characteristics comply with “V-Log/V-Gamut
REFERENCE MANUAL Rev.1.0”. When set to [V-Log], the standard
exposure when grey with a reflectance ratio of 18% is imaged is IRE 42%.
0
Refer to the “Operating Instructions” (PDF format) for details.
[V-Log View Assist]
When [Photo Style] is set to [V-Log], the recording screen and images
output via HDMI will darken. Using [V-Log View Assist] means you can
show images with LUT data applied on the monitor/viewfinder and output
them via HDMI.
¨ [ ] ¨ [ ] ¨ Select [V-Log View Assist]
Log Recording
0 Post-production processing is enabled by utilising LUT (Look-Up Table).
You can download LUT data from the following support site:
https://panasonic.jp/support/global/cs/dsc/download/index3.html
(English only)
[Read LUT File] Reads LUT data from the card.
[LUT Select]
Selects the LUT data to be applied from among the
preset ([Vlog_709]) and registered LUT data.
[LUT View Assist
(Monitor)]
Displays the images with LUT data applied on the
monitor/viewfinder of the camera.
[LUT View Assist (HDMI)] Applies LUT data to images output over HDMI.
DC-S1HGN-DVQX1961_eng.book 129 ページ ２０１９年８月８日 木曜日 午後５時５５分
To Next Page
Loading...
