18. Materials
DVQX1961 (ENG)
193
0 When connected to Wi-Fi, the battery drains quickly.
Turn the camera off frequently such as by using [Power Save Mode] (l 34).
0 Confirm the following details:
– Is the subject outside of the focus range?
– Is [Shutter AF] set to [OFF]?
– Is [Focus/Shutter Priority] set to [RELEASE]?
– Is AF Lock set where it is not appropriate?
0 The shutter speed will become slower and the image stabiliser function may not
work properly when recording in dark places.
In these cases, use a tripod and the self-timer when recording.
This is a characteristic of the CMOS sensor that is the image sensor of the camera,
and is not a malfunction.
Recording stops before finishing.
Cannot record.
Cannot use some functions.
0 In high ambient temperatures or if the camera is used for continuous recording, the
temperature of the camera will rise.
To protect the camera against a rise in temperature, after [ ] is displayed,
recording will be stopped, and the following functions will not be available for a time.
Wait until the camera cools down.
– [6K/4K PHOTO]
– [Post-Focus]
– Video recording
– [AF-Point Scope]
The subject is not focused properly.
The recorded image is blurred.
The image stabiliser is not effective.
The subject appears distorted on the image.
0 When a moving subject is recorded while using the following functions, the subject
may appear distorted in the picture:
– [ELEC.]
– Video recording
– [6K/4K PHOTO]
DC-S1HGN-DVQX1961_eng.book 193 ページ ２０１９年８月８日 木曜日 午後５時５５分
To Next Page
Loading...
