18. Materials
DVQX1961 (ENG)
196
0 Depending on the wireless access point, the radio wave may not be displayed even
though it is present.
– Turn off and then on the wireless access point.
– If the wireless channel of the wireless access point cannot be set automatically,
manually set the channel supported by the camera.
– If the wireless access point SSID is set not to broadcast, it may not be detected.
Enter the SSID, and then connect.
0 At the time of purchase, this camera is set to use a workgroup name of
“WORKGROUP”.
If you have changed the workgroup name of the PC, this will not be recognised.
In the [Wi-Fi Setup] menu, [PC Connection], change the workgroup name of the PC
to which to connect.
0 Check that the login name and password are correctly typed.
0 When the clock settings of the PC connected to the camera differs considerably from
those of the camera, the camera cannot be connected to the PC depending on the
OS.
0 Is the size of the image too large?
– Reduce the image size at [Size], and then send.
– Transmit after dividing the video with [Video Divide].
0 It may take longer time to transmit when distance to the wireless access point is far.
Transmit closer to the wireless access point.
0 File format of the video that can be sent differs depending on the destination.
0 Depending on the [Aspect Ratio], grey bands may be displayed on the top and
bottom or the left and right of the images. You can change the band colour in
[Background Color(Playback)] in [TV Connection] of the [Setup] ([IN/OUT]) menu.
The PC is not recognised when I use a Wi-Fi connection.
The camera cannot be connected to the PC using the Wi-Fi function.
It takes time to transmit an image to the web service.
Transmission of the image fails midway.
Some images cannot be transmitted.
The TV images are displayed with grey bands.
DC-S1HGN-DVQX1961_eng.book 196 ページ ２０１９年８月８日 木曜日 午後５時５５分
To Next Page
Loading...
