2. Getting Started
DVQX1961 (ENG)
26
1
Connect the charger and the
AC adaptor with the USB
connection cable (C–C).
0 Hold the plugs and insert them straight
in or pull them straight out.
(Inserting these at an angle may cause
deformation or malfunction)
2
Connect the AC cable to the
AC adaptor and then insert
into the electrical outlet.
3
Insert the battery.
≥Insert the terminal end of the
battery and push.
≥The [CHARGE] light A blinks and
charging begins.
0 Do not use any other USB connection cables except the supplied USB
connection cable (C–C).
This may cause malfunction.
0 Do not use any other AC adaptors except the supplied one.
This may cause malfunction.
0 Do not use any other AC cables except the supplied one.
This may cause malfunction.
DC-S1HGN-DVQX1961_eng.book 26 ページ ２０１９年８月８日 木曜日 午後５時５５分
To Next Page
Loading...
