3. Basic Operations
DVQX1961 (ENG)
42
Taking Pictures
1
Adjust the focus.
≥Press the shutter button halfway
(press it gently).
≥The aperture value A and shutter
speed B are displayed.
(When the correct exposure cannot
be obtained, the indications blink in
red.)
≥Once the subject is in focus, the
focus indication C lights.
(When the subject is not in focus,
the indication blinks.)
0
You can also perform the same operation by pressing [AF ON].
2
Start recording.
≥Press the shutter button fully (press
it further).
0 Recorded pictures can be displayed automatically by setting [Auto Review] of
the [Custom] ([Monitor / Display (Photo)]) menu. You can also change the
picture display duration to your preferred setting.
0 With the default settings, you cannot take a picture until the subject is
brought into focus.
If you set [Focus/Shutter Priority] in the [Custom] ([Focus/Shutter])
menu to [BALANCE] or [RELEASE], you will be able to take a picture
even when the subject is not in focus.
DC-S1HGN-DVQX1961_eng.book 42 ページ ２０１９年８月８日 木曜日 午後５時５５分
To Next Page
Loading...
