6. Image Stabiliser
DVQX1961 (ENG)
73
Image Stabiliser Settings
Set the image stabiliser operation to match the recording situation.
¨ [ ] ¨ [ ] ¨ Select [Image Stabilizer]
0 When the shutter button is pressed halfway, the camera shake alert icon
[ ] may be displayed on the recording screen.
If this is displayed, we recommend using a tripod, the self timer or the Shutter
Remote Control (DMW-RS2: optional).
0 We recommend turning off the image stabiliser function when using a tripod.
0 When the following function is being used, the image stabiliser function is not
available:
– [High Resolution Mode]
[Operation Mode]
Sets the stabilisation movement (blur) to match the
recording method (normal, panning). (l 74)
[Body(B.I.S.) /
Lens(O.I.S.)]
[ ] ([Body]) Uses the in-body image stabiliser.
[ ] ([Lens]) Uses the in-lens image stabiliser.
0 This can be set when using other manufacturer’s lenses
with an image stabilisation function.
[When to Activate]
[ALWAYS]
The image stabiliser is always
operating.
[HALF-
SHUTTER]
The image stabiliser operates when the
shutter button is pressed halfway.
[E-Stabilization
(Video)]
Camera shake during video recording is corrected along
the vertical, horizontal, roll, pitch, and yaw axes through the
combined use of the in-lens, in-body, and electronic image
stabilisers. (5-Axis Hybrid Image Stabiliser)
0 The [ ] on the recording screen changes to [ ]
while [E-Stabilization (Video)] is functioning.
0 The angle of view may become narrower if set to [ON].
DC-S1HGN-DVQX1961_eng.book 73 ページ ２０１９年８月８日 木曜日 午後５時５５分
To Next Page
Loading...
