Panasonic Lumix S1H Series

8. White Balance/Image Quality
DVQX1961 (ENG)
83

Registering the White Set ([ ] to [ ])
Take pictures of a white object under the light source of the recording
location to adjust the white balance until it appears white.
1
Press [WB] and then select any value from [ ] to [ ].
2
Press 3.
3
Aim the camera at a white object so that it appears inside the frame at
the centre of the screen and then press or .
0
This will set the white balance and return you to the recording screen.

Colour Temperature Setting ([ ] to [ ])
Set the numeric value for the white balance colour temperature.
1
Press [WB] and then select any value from [ ] to [ ].
2
Press 3.
0
The colour temperature setting screen is displayed.
3
Press 34 to select the colour temperature and then press or
.
0
You can set the White Balance Bracket (Colour Temperature) by rotating ,
or .
Adjusting the White Balance
You can adjust the colouring even when the colouring you want to apply is
not produced by the selected white balance.
1
Press [WB].
2
Select the white balance and
then press 4.
≥The adjustment screen is displayed.
3
Adjust the colouring.
0 You can set a colour temperature from [2500K] to [10000K].
1
4
1
4
1
4
1
4
GGGGGG
MMMMMM
AAAAAABBBBBBB
DC-S1HGN-DVQX1961_eng.book 83 ページ ２０１９年８月８日 木曜日 午後５時５５分